Skip to content

Cart

Your cart is empty

Solar-powered artificial leaf to produce hydrogen from air

Solar-powered artificial leaf to produce hydrogen from air

https://www.pv-magazine.com/2023/01/10/solar-powered-artificial-leaf-to-produce-hydrogen-from-air/

Solar-powered artificial leaf to produce hydrogen from air

Share

Chemical engineers from École polytechnique fédérale de Lausanne (EPFL) have developed a solar-powered transparent, porous and conductive electrode, which uses an input stream of humid air to produce H2.

The electrode’s substrate is a three-dimensional mesh of felted glass fibers, a type of glass wool, which is essentially quartz. The silicon oxide fibers are then fused together at high temperatures to produce felt wafers. The wafers are initially coated with a transparent thin film of fluorine-doped tin oxide, and then with a thin-film of sunlight-absorbing semiconductor materials.

“The coating of various semiconductors on the substrates is established including Fe2O3 (chemical bath deposition), CuSCN and Cu2O (electrodeposition), and conjugated polymers (dip coating),” the scientists wrote in “Transparent Porous Conductive Substrates for Gas-Phase Photoelectrochemical Hydrogen Production,” which was recently published in Advanced Materials. 

The scientists took inspiration for the electrode from the way in which plants can convert sunlight into chemical energy by using carbon dioxide from the air.

“Since each step is relatively simple and scalable, I think that our approach will open new horizons for a wide range of applications starting from gas diffusion substrates for solar-driven hydrogen production,” said Marina Caretti, the lead author of the project.

The scientists did not formally study the solar-to-hydrogen conversion efficiency in their demonstration, but they acknowledge that it is modest for this prototype. 

Popular content

“Based on the materials used, the maximum theoretical solar-to-hydrogen conversion efficiency of the coated wafer is 12%, whereas liquid cells have been demonstrated up to 19% efficient,” said the EPFL engineers. They worked in collaboration with Toyota Motor Europe.

To examine the possibility of the transparent porous conducting substrate (TPCS)-based photocathode to produce H2 in a gas-phase environment, the team constructed a half-gas phase cell composed of two compartments. The anode side operated in an acidic liquid electrolyte, while the electrode was pressed into a polymer electrolyte membrane (PEM) to form a photoelectrode-membrane assembly. 

They concluded that the TPCS is “a promising substrate for the further development of the PEM-PEC concept and other applications where high porosity, conductivity, and transparency are required.”

Photoelectrochemical (PEC) technology produces hydrogen from water by using sunlight and specialized semiconductors known as “photoelectrochemical materials.” The scientists will now work on a fully functional photosynthetic fuel cell using the new electrode.

This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.

Subscribe to our newsletter

Promotions, new products and sales. Directly to your inbox.