Passer au contenu

Panier

Votre panier est vide

Dual-axis solar tracker based on UV, MEMS sensors

Dual-axis solar tracker based on UV, MEMS sensors

https://pv-magazine-usa.com/2024/08/07/dual-axis-solar-tracker-based-on-uv-mems-sensors/

Dual-axis solar tracker based on UV, MEMS sensors

Share

From pv magazine Global

An Indian-Chinese research team has developed a novel dual-axis solar tracking system based on sensors and a controller module.

“In this work, an attempt was made to design and implement a single tracking motor with dual axis for a simple yet effective control system,” the researchers said. “No programming or computer interface is required as standard electronic circuits are used. This system is independent and self-sufficient.”

The group explained that the novel system uses two different sensor types – an ultraviolet (UV) sensor and a micro-electromechanical solar (MEMS) sensor. “The UV sensor calculates the intensity of UV radiation received from the sun, and the MEMS sensor forecasts the sun’s path across the sky,” they added.

The data collected by those sensors are then fed into an arithmetic optimization-based PID (AOPID) controller, which uses arithmetic-based functions to attain a better response time, tracking accuracy, and disturbance rejection.

“The AOPID controller utilizes the inputs from the UV and MEMS sensors to modify the position of the solar panels and optimize energy capture,” the scientists further explained. “The controller achieves this by using a feedback loop that adjusts the controller’s proportional, integral and derivative gains to reduce the variation between the set-point and the real location of the solar panels through the use of arithmetic optimization algorithms.”

The academics tested the proposed system using MATLAB simulation software based on a 50 W simulated PV panel. They then compared its power production and consumption over a few hours to those of a simulated fixed-tilt PV system.

“The comparative energy analysis graph demonstrates that the dual-axis solar tracking system that was suggested was more productive than the fixed-tilt solar tracking system and matrix converter,” the researchers “Achieving a high net energy requires precisely adjusting the controller’s parameters and positioning the panels.”

The system was presented in the paper “Solar PV tracking system using arithmetic optimization with dual axis and sensor,” published in Measurement: Sensors. The research was conducted by scientists from China’s Xinxiang Vocational and Technical College and India’s Publon Research Centre.

This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.

 

Popular content

SunPower goes bankrupt
06 August 2024The residential solar installer has filed for bankruptcy, among the largest in a series of major bankruptcies in the industry.

Subscribe to our newsletter

Promotions, new products and sales. Directly to your inbox.